C708 TAYLOR

泰 勒 C708 單槽

霜淇淋機
特色：取代754巨無霸機型
提供大眾而富變化的聖代，有低脂或脫脂冰淇淋 到霜淇淋、優格及雪花酪等並可提供單種口味的產品。

最新的推進在技術熱處理冷凍機器
過程減少辛苦 和每日維修費用因為
設備只要求拆卸清潔一次每 十四天。

 
冷凍缸：
1個，3.4夸特(3.2公升)
抽料泵：
1 個抽取奶槳與空氣混合比至冷凍 缸
熱觸發的系統：
提供每日的加熱和冷卻循 環週期,安全地維持乳製品直到14天之霜淇淋機被清除 需要.
儲料槽：
1個，20夸特(18.9公升)；在 自動(auto)或待機(standby)的模式下，儲料槽的溫度將 保持在41℉(5℃)以下。
觸控螢幕控件：
硬 度被測量服務一致的質量軟的
服務. 軟體封鎖特色 改進可靠性. 溫度在
單足跳者 冷凍缸可以從事於任 何點陳列
的操作. 歷史的溫度和時期的時間最後的
人365天周期可以被觀看.。
氣冷式(Air Cooled)：
散熱空間周圍最小需3英吋(7.6cm)以 上。本機裝導風裝置防止暖空氣回流且需有足夠空間讓 空氣流通以確保機器有最佳的性能。
水冷式 (Water Cooled)：冷卻水進出水管為1/2英吋。
電 力:
必須有專用且固定性的電源電路，依電力表供 應適合電力給設備使用，電源線路額定容量及設置，可 與當地經銷商聯絡商討依當地電工法規行之。
冷 卻系統：
1組9500 BTU/hr、404A冷媒
1組 400 BTU/hr、R134A冷媒，分離式儲
料槽冷卻系 統。
(BTU值依使用壓縮機不同而有變化)

選項配 備：
蛋捲分配器
排水口配件
排水閥 配件
水龍頭
儲料槽鎖
Mix Low Chime
攪拌桿
維修箱
噴嚏防護物
糖漿槽

C708
Offer all the popular soft serve variations from low- to
non-fat ice creams or yogurt.
Heat Treatment System
Provides a daily heating and cooling cycle to safely maintain
dairy products up to two weeks before a complete disassembly
and cleaning is required.
Freezing Cylinder
One, 3.4 quart (3.2 liter).
Mix Hopper
One, 20 quart (18.9 liter). Refrigerated to maintain mix below
41ºF (5ºC) in Auto and Standby modes. Easy to assemble air/mix
pump delivers the precise amount of air and mix to the freezing
cylinder.
Indicator Lights
Mix Low light alerts the operator to add mix. When the Mix Out
light flashes, the unit automatically goes into Standby mode to
prevent damage.
Touch Screen Controls
Viscosity is continually measured to serve consistent quality soft
serve. Soft lock out features improve reliability. Temperatures in
the hoppers or freezing cylinders may be displayed at any point
of operation. History of temperatures and times during the last
366 heat cycles may be viewed.
Standby
During long no-use periods, the standby feature maintains safe
Features
Soft Serve Freezer
TM Single Flavor, Pump

Specifications
Electrical
One dedicated electrical connection is required. See the Electrical chart
for the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.
Beater Motor
One, 1.5 HP.
Refrigeration System
One, 9,500 BTU/hr. R404A.
Air Cooled
Minimum 6” (152 mm) on both sides and place the back of the unit against
a wall to prevent recirculation of warm air. Minimum air clearances must
be met to assure adequate air flow for optimum performance.
Optional air discharge chute directs heated air exhaust upwards. No
clearance required on right side if air discharge chute is used.
Water Cooled
Water inlet and drain connections on right side or under side of base, 3/8”
FPT.

Options
Cart with casters-height to top of hopper cover: 59-1/8” (1502mm)

Cone Dispenser

Legs - [increase height of unit by 4-1/4” (108 mm)]

Syrup Rail Kit (side mount)
Top Air Discharge Chute (air cooled only)